Display RADIUS Server Reachability

About this task

Use this procedure to display the RADIUS server reachability configuration.

1. To enter User EXEC mode, log on to the switch.
2. Display the RADIUS server reachability configuration:

   show radius reachability

Example

Display the RADIUS server reachability configuration.

Switch:1#show radius reachability
        EAP RADIUS reachability mode   : use-radius
        EAP RADIUS reachability status : RADIUS is disabled globally
        EAP RADIUS reachable server    : none
        Time until next check          : N/A
        RADIUS username                : reachme
        RADIUS password                : reachme
        RADIUS keep-alive-timer        : 180
        RADIUS unreachable-timer       : 60